LENOVO 01CV830 EMULEX 16GB FC SINGLE-PORT HBA
35.838,81 TL
Kategori
Marka
Stok Kodu
210123874
Garanti Süresi
24 Ay
Fiyat
927,18 USD + KDV
*10.174,64 TL den başlayan taksitlerle!!
Technical specifications
The Emulex 16 Gb Gen 6 FC HBAs have the following specifications:
- Based on the LPe31000 (single port) and LPe31002 (dual port) adapters
- I/O controller: Emulex Engine 501 (XE501) I/O Controller (IOC)
- Host interface: PCIe 3.0 x8
- Ports: Single-port and dual-port SFP+ based adapters
- Link speed: Support for 16 Gb, 8 Gb and 4 Gb FC link speeds, which are automatically negotiated
- Data rate: 14.025 Gbps (1600 MBps), 8.5 Gbps (800 MBps), and 4.25 Gbps (400 MBps) autosensing (per port), with full duplex
- Performance: Up to 1,600,000 IOPS
- Industry standards:
- Current ANSI/IETF standards: FC-PI-4, FC-PI-5, FC-PI-6 , FC-FS-3, FC-LS-2, FC-GS-6, FC-DA, FC-DA2, FCP-4, SPC-4, SBC-3, and SSC-4
- Legacy ANSI/IETF standards: FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-PI-2, FC-PI-3, FC-FS, FC-GS-2/3/4/5, FCP-2/3, FC-HBA, FC-TAPE, FC-MI, SPC-3, SBC-2, SSC-2, and SSC-3
- Topology: Point-to-point and switched fabric
- Hot-pluggable 16 Gbps Fibre Channel SFP+ short wave optical transceivers (850 nm) with LC connectors (included with the adapters). Note: Other transceivers are not supported.
- Distance support:
- Operating at 16 Gbps:
- Up to 15 m on 62.5/125 µm OM1 Multi-Mode Fiber (MMF)
- Up to 35 m on 50/125 µm OM2 MMF
- Up to 100 m on 50/125 µm OM3 MMF
-
Up to 125 m on 50/125 µm OM4 MMF
- Operating at 8 Gbps:
- Up to 21 m on 62.5/125 µm OM1 MMF
- Up to 50 m on 50/125 µm OM2 MMF
-
Up to 150 m on 50/125 µm OM3 MMF
- Operating at 4 Gbps:
- Up to 70 m on 62.5/125 µm OM1 MMF
- Up to 150 m on 50/125 µm OM2 MMF
- Management software:
-
Emulex AutoPilot Installer automates the HBA installation process and reduces time to deployment and administrative costs. Automated installation and configuration of driver and management tools simplifies deployment of multiple adapters within Windows environments. A single installation of driver and management application eliminates multiple reboots and ensures that each component is installed correctly and the HBA is ready to use.
-
The Emulex HBA Manager application enables centralized discovery, monitoring, reporting, and administration of Emulex HBAs and CNAs on local and remote hosts. Powerful automation capabilities facilitate remote driver parameter, firmware, and boot code upgrades. In addition to the GUI interface, management functions can also be performed through a scriptable command-line interface (CLI) and a web browser.
- Emulex management instrumentation complies with Open Management Standards, such as SMI-S and common HBA API support, which enables seamless upward integration into enterprise storage and server management solutions.
The Emulex 16 Gb Gen 6 FC HBAs have the following specifications:
- Based on the LPe31000 (single port) and LPe31002 (dual port) adapters
- I/O controller: Emulex Engine 501 (XE501) I/O Controller (IOC)
- Host interface: PCIe 3.0 x8
- Ports: Single-port and dual-port SFP+ based adapters
- Link speed: Support for 16 Gb, 8 Gb and 4 Gb FC link speeds, which are automatically negotiated
- Data rate: 14.025 Gbps (1600 MBps), 8.5 Gbps (800 MBps), and 4.25 Gbps (400 MBps) autosensing (per port), with full duplex
- Performance: Up to 1,600,000 IOPS
- Industry standards:
- Current ANSI/IETF standards: FC-PI-4, FC-PI-5, FC-PI-6 , FC-FS-3, FC-LS-2, FC-GS-6, FC-DA, FC-DA2, FCP-4, SPC-4, SBC-3, and SSC-4
- Legacy ANSI/IETF standards: FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-PI-2, FC-PI-3, FC-FS, FC-GS-2/3/4/5, FCP-2/3, FC-HBA, FC-TAPE, FC-MI, SPC-3, SBC-2, SSC-2, and SSC-3
- Topology: Point-to-point and switched fabric
- Hot-pluggable 16 Gbps Fibre Channel SFP+ short wave optical transceivers (850 nm) with LC connectors (included with the adapters). Note: Other transceivers are not supported.
- Distance support:
- Operating at 16 Gbps:
- Up to 15 m on 62.5/125 µm OM1 Multi-Mode Fiber (MMF)
- Up to 35 m on 50/125 µm OM2 MMF
- Up to 100 m on 50/125 µm OM3 MMF
-
Up to 125 m on 50/125 µm OM4 MMF
- Operating at 8 Gbps:
- Up to 21 m on 62.5/125 µm OM1 MMF
- Up to 50 m on 50/125 µm OM2 MMF
-
Up to 150 m on 50/125 µm OM3 MMF
- Operating at 4 Gbps:
- Up to 70 m on 62.5/125 µm OM1 MMF
- Up to 150 m on 50/125 µm OM2 MMF
- Operating at 16 Gbps:
- Management software:
-
Emulex AutoPilot Installer automates the HBA installation process and reduces time to deployment and administrative costs. Automated installation and configuration of driver and management tools simplifies deployment of multiple adapters within Windows environments. A single installation of driver and management application eliminates multiple reboots and ensures that each component is installed correctly and the HBA is ready to use.
-
The Emulex HBA Manager application enables centralized discovery, monitoring, reporting, and administration of Emulex HBAs and CNAs on local and remote hosts. Powerful automation capabilities facilitate remote driver parameter, firmware, and boot code upgrades. In addition to the GUI interface, management functions can also be performed through a scriptable command-line interface (CLI) and a web browser.
- Emulex management instrumentation complies with Open Management Standards, such as SMI-S and common HBA API support, which enables seamless upward integration into enterprise storage and server management solutions.
-
Bu ürüne ilk yorumu siz yapın!